Forum

Blog

Blog Post

Welcome, Guest
Username: Password: Remember me

TOPIC: Level 1 Certification Question

Re:Level 1 Certification Question 11 years 8 months ago #187

  • admin
  • admin's Avatar
Hey Carl,

What are you building?

Mario

CenturiBAR wrote:
I think this is my year to finally try Level 1 too Steve. I've been threatening for the last 2 or 3 years, but never seem to find the time. I now have the kit, and have actaully started building it.

-Carl
The administrator has disabled public write access.

Re:Level 1 Certification Question 11 years 8 months ago #188

  • Carl Kruger
  • Carl Kruger's Avatar
  • Offline
  • Junior Boarder
  • Posts: 39
  • Karma: 0
A 38mm 3" BSD Thor. I should be able to use it for both Level 1 and Level 2 Certs.
The administrator has disabled public write access.

Re:Level 1 Certification Question 11 years 8 months ago #189

  • admin
  • admin's Avatar
That should do the trick. The Thor is a nice design.

Mario

CenturiBAR wrote:
A 38mm 3" BSD Thor. I should be able to use it for both Level 1 and Level 2 Certs.
The administrator has disabled public write access.

Re:Level 1 Certification Question 11 years 8 months ago #190

  • Carl Kruger
  • Carl Kruger's Avatar
  • Offline
  • Junior Boarder
  • Posts: 39
  • Karma: 0
admin wrote:
That should do the trick. The Thor is a nice design.

Mario


I agree, but I've already found a couple of issues with the design and the assembly instructions. Glad I noticed them before I put epoxy to it. :side:
The administrator has disabled public write access.

Re:Level 1 Certification Question 11 years 8 months ago #191

  • admin
  • admin's Avatar
conleyt wrote:
I'm considering it...... :)
[/quote]

Tom, What's holding you back?

Mario
The administrator has disabled public write access.

Re:Level 1 Certification Question 11 years 8 months ago #192

  • Aaron Head
  • Aaron Head's Avatar
  • Offline
  • Expert Boarder
  • Posts: 142
  • Karma: 0
I have almost all the Aerotech cases in the 29mm, 38mm and a few of the 54mm as well as the complete SkyRipper hybrid cases (29mm, 38mm, 54mm) that I'd be willing to let people borrow for certification attempts. Only caveat is that if you lose it, you replace it. The AMW 75mm case I have could be used for a level 2 attempt, but not too many people go for their level 2 with a full K or small L motor. I even have HPR reloads for several of the cases that I can let people use and then replace.

Build a rocket and I'm sure we can come up with ways to get it up in the sky.

-Aaron
The administrator has disabled public write access.
Time to create page: 0.094 seconds